Proper operation of professional chainsaw

Comments · 80 Views

professional chainsaw https://www.keylead.cn/Chain-Saw

The use of professional chainsaw is relatively simple, which is the feeling of many people after operating professional chainsaw. However, this is for users who have used professional chainsaw many times, many users are just bought, and they are not so familiar with its operation method. Although they have heard others say that it is simple, it is a mechanical equipment after all, and the irregular operation method is likely to threaten the safety of the operator. Therefore, it is important to understand and master the proper operation of professional chainsaw. The following is a detailed analysis by De Hua for everyone, in fact, the main method is divided into two steps, one is weeding before the other is weeding, respectively introduced!

Before weeding: Check the weed area and remove stones and other objects in the weeds. This is to prevent the blade of the professional chainsaw from touching stones when it is running.

After weeding: Turn off the power switch and clean up after the blade stops turning completely. Clean the weeds attached to the professional chainsaw, or the next use will affect the heat dissipation. It is also necessary to check the condition of the blade to see if there is damage, and replace it in time if it is damaged. But in general, the blade will not be damaged. In addition, the screw tightness of the link part, although this is generally not bad, but still need to be checked on time. In this way, problems can be detected and solved in time.

professional chainsaw manufacturers remind users that they can not feel that their operation is simple and operate at will, which is not right. This is not only the professional chainsaw equipment is not responsible, but also for their own personal safety is not responsible. Only the correct operation can ensure the efficiency of the equipment and extend the service life to reduce the cost. In addition, when cutting grass, if the weeds are too high, you can harvest them twice, cut the top half first, and then trim the bottom half when the height is reduced.

professional chainsaw https://www.keylead.cn/Chain-Saw

Comments